Striking Tools, miscellaneous
impact force adjustable by turning black handle
oversized hexagon bits in 5.1, 6.1, 7.1 and 8.1 mmfor worn-out screws: Use hammer to punch oversized bit into screw head. Then use impact driver or 10 mm spanner for loosening.conical shape for better fittting into screw headincl. impact driver for powerful looseningideal for starter, brake caliper, brake disc, pulleys etc.
6 centre punches: ø 3, 4, 5, 6, 7, 8 mm in practical plastic holder chrome-vanadium-steel
softgrip for impact damping chrome-molybdenum steel
interchangeable inserts, e.g. for mortising jobs 1 holder with quick release coupling and protective grip 7 flat chisels 1 cape chisel 2 taper punches 2 centre punches 2 pin punches
softgrip for impact damping chrome-molybdenum steel
designed to cut clean holes in all kinds of sealing materials, especially in the automotive sector, with spring-loaded centering pin1 holder with protective grip13 exchangeable punches
common thread UN 1.1/2" x 16, can be combined with many pullersideal substitute for hydraulic spindles when using a torch, because the torch can damage sealings of hydraulic spindleapplication: screw impact spindle into suitable yoke and tighten firmly with impact key; then hit spindle head with hammer to loosen tight connection
letter style complies with DIN 1451, for hammering on steel and iron
number style complies with DIN 1451, for hammering on steel and iron
360° rotatable splitting pinforged
6 parallel pin punches: ø 3, 4, 5, 6, 7, 8 mm in practical plastic holder chrome-vanadium-steel
supplied in plastic pouch, chrome-vanadium-steel
7 pin punches: ø 1.6 x 100, 2.4 x 105, 3.2 x 120, 4 x 125, 4.8 x 130, 6.3 x 145, 9.5 x 200 mm 8 conical pin punches: ø 2.4 x 130, 3.2 x 145, 3.2 x 150, 4 x 150, 4.8 x 160, 4.8 x 250, 6.3 x 170, 9.5 x 250 mm 4 centre punches: ø 3.2 x 125, 4 x 145, 4.8 x 150, 6.3 x 200 mm 9 air-hardened chisels: 9.5 x 140, 12.7 x 150, 12.7 x 170, 15.8 x 165, 15.8 x 175, 19 x 200, 21 x 200, 22 x 250, 25 x 250 mm chrome-vanadium-steel and carbon steel
2 conical pin punches: ø 3 x 10 x 120, 4 x 12 x 150 mm 2 flat chisels: 12 x 10 x 130, 15 x 12 x 150 mm 1 cross chisel: 5 x 10 x 130 mm 1 centre punch: 4 x 10 x 120 mm in practical plastic holder chrome-vanadium-steel
5 pin punches: ø 3, 4, 5, 6 and 8 mm, 150 mm long 1 flat chisel: 15 x 150 mm 1 cross chisel: 4 x 150 mm 1 centre punch: 3 x 150 mm chrome-vanadium-steel
softgrip for impact dampingchrome-molybdenum steelpin punch with ø 3 - 4 - 5 - 6 - 7 - 8 mm, 180 mm longcentre punch ø 4 x 10 mm, 185 mm longcross chisel 5 x 10 mm, 170 mm longflat chisel 16 x 10 mm, 170 mm longflat chisel 20 x 14 mm, 210 mm long
softgrip for impact damping suitable for wall mounting chrome-molybdenum steel ø 3, 4, 5, 6, 7, 8 mm, 180 mm long
softgrip for impact damping chrome-molybdenum steel