Drills
ideal for hard to reach areas
provides accurate sharpening of twist drills5 pre-set angles: 41, 49, 59, 68, 88°
ideal for drilling, grinding and polishing in hard to reach areas
to drill out damaged screw heads or threaded bolts, e.g. on exhaust manifold
roll forged, manufactured according to DIN 338 edge ground, tip angle 118° for drilling in ordinary metal < 800 N/mm², e.g. steel, cast iron each size 10 pcs. ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 mm each size 5 pcs. ø 8.5, 9.0, 9.5, 10.0 mm
roll forged, manufactured according to DIN 338 edge ground, tip angle 118° for drilling in ordinary metal < 800 N/mm², e.g. steel, cast iron
titanium nitrided, for higher durability and better sliding properties roll forged, manufactured according to DIN 338 edge ground, tip angle 118° for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron each size 10 pcs., ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 mm each size 5 pcs., ø 8.5, 9.0, 9.5, 10.0 mm
5% cobalt alloy material for max. durability 9 drill steps increasing by 2 mm for material up to 4 mm thickness integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
titanium coated, minimum wear 9 drill steps increasing by 2 mm for material up to 4 mm thickness integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
5% cobalt alloy for maximum durability for material up to 4 mm thickness 4-20 and 4-30 mm with integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
HSS, titanium coated, minimum wear
5% cobalt alloy material for max. durability 9 drill steps increasing by 1 mm for material up to 4 mm thickness
HSS, titanium coated, minimum wear
5% cobalt alloy material for max. durability 9 drill steps increasing by 2 mm for material up to 4 mm thickness integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
5% cobalt alloy material for max. durability 14 drill steps increasing by 2 mm for material up to 4 mm thickness integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
titanium nitrided, for higher durability and better sliding properties roll forged, manufactured according to DIN 338 edge ground, tip angle 118° for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron
9 twist drill bits ø 3, 4, 4.5, 5, 5.5, 6, 7, 8, 10 mm 1 micro reversible ratchet for bits 1 adapter, 1/4" square x 1/4" hexagon 2 bit holders with quick release, length 67 and 150 mm 25 bits
5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm
fully ground, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm