Brake Pipe and Hydraulics

supplied in plastic case

connector suitable for popular German systemscup made from aluminium, suitable for all vehicles with Euro 20 screw connection on fluid reservoirwith offset, swivel hose connectionspecially suitable for vehicles with confined spaces, e.g. VW Sharan, Ford Galaxy, various Japanese cars

connectors suitable for popular German systems supplied in plastic case 8 adapters for the most popular applications:Adapter, ø 42 mm (No. 6)Adapter, for Opel, ø 43.5 mmFiller Cap, for Opel, ø 43.5 mm, for closing the second filler openingsAdapter, for Nissan, ø 49.5 mmAdapter, for Honda, ø 56 mm (No. 9)Adapter, for BMW, Audi ø 44.2 mm (No. 4+5)Adapter, with bayonet lock, ø 34.5 mm (No. 10)

connector suitable for popular German systemswith angled hose connection, 360° rotatablesolid design, made from aluminium

connector suitable for popular German systemswith angled hose connection, 360° rotatablesolid design, made from aluminium

for bleeding hydraulic brakes and clutchesalso for changing brake fluidwith refill set for brake fluid reservoirworking pressure 5-12 barincl. air nipple 1/4"

coupler suitable for adapters from many manufacturers (adapters not included in delivery)for brake bleeding and changing fluids in hydraulic brake and clutch systemssuitable for vehicles with ABSregulator for adjustable bleeding pressurefor one-man operationfor all popular brake fluidsincl. waste bottle and pipette to empty expansion tank

enables 1-person bleeding of hydraulic brake systems incl. drain hose and rubber pipe for bleeder nipple also suitable for bleeding fuel lines after filter changes, hydraulic clutch and steering systems capacity: 1 L operating pressuer: 5-8 bar connection thread: 1/4″

for bleeding and changing fluids in brake and clutch systems bleeding pressure adjustable from 0.6 - 3.0 bar for one-man operation automatic switch-off when the container is empty incl. brake bleeding adapter Euro 20, hose connection 90° offset for containers up to 5 liters

for collecting brake fluid when using permanent pressure brake bleeding toolsfor collecting brake fluid when bleeding manually in 2-man operation

avoids wheel disassembly for brake bleeding e.g. on Audi / VW / Seat / Skoda go-through sockets, allows hose to pass through, e.g. when using a vacuum pump (Condor item No. 3550) includes hose, inner ø 4 mm also suitable for bleeding hydraulic clutches

avoids wheel disassembly for brake bleeding e.g. on Audi / VW / Seat / Skoda go-through sockets, allows hose to pass through, e.g. when using a vacuum pump (Condor item No. 3550) also suitable for bleeding hydraulic clutches

for bleeding brake systems without removing the wheelsincl. 1200 mm bleeder hose with check valve for bleeding without 2nd personfor universal bleeder nipples with size 7, 8, 9, 10, 11 mmalso suitable for bleeding hydraulic clutches

enables the exact reproduction of an old brake line for parallel fixing of old and new brake lines during the bending process the clamping does not change the diameter of the break line suitable for brake lines with ø 4.75 mm, made of copper, steel and plastic-coated

for coated brake lines, e.g. at VW and BMWfor scraping the coating on brake lines, e.g. for flanging workfor brake lines with ø 3-16 mm

for 4.75 and 6 mm brake pipesfor steel, copper and plastic coated brake pipesbending does not cause any change in pipe diameter

for flaring according to DIN F incl. brake pipe ratchet cutter, brake service spanner 10x11 mm and bending tool for ø 3 mm, 4.75 mm (3/16") and 6 mm pipes small and compact construction, to be applied directly under the vehicle, also in hard-to-reach areas

small and compact construction, to be applied directly under the vehicle, also in hard-to-reach areas for convex and double flaring according to DIN and SAE for brake pipes with ø 4.75 mm (3/16")

small and compact construction, to be applied directly under the vehicle, also in hard-to-reach areasfor brake pipes with ø 4.75 mm and ø 3/16"for hydraulic brake systems and clutch actuation on motor vehiclessuitable for steel, copper and aluminum pipes

for quick and easy cutting of brake pipes with ø 4.75 mmcompact design and ratchet function for use in narrow spacesautomatic adjustment of blade contact pressure enables cutting without tiresome adjustment of clamping screwspare blade available under No. 5737-01

for straightening and bending brake lines, fuel lines, etc. compact design allows use directly on the vehicle clamping screw with T-handle for precise bends of up to 90° bending does not cause any change in pipe diameter ideal for straightening of reels suitable for aluminium, copper, brass and mild steel pipes

reinforced jaw for high durabilityoffset

for manual 1-man operationfor manual brake bleeding on hydraulic brake systemsreliably prevents air intrusion into brake systemfor cars, vans and motorcyclesalso suitable for hydraulic clutch systems

ideal for deburring brake lines, e.g. after shortening suitable for aluminium, copper, brass and soft steel pipes for pipes with inner-ø 3-12 mm