professional tool quality est. 1973

Running Gear - Paschke Profitec

1 - 24 (162)Number:
33201302.JPG
Article number: 33201302
  • for changing bearings on the front and rear axle without removing the axle. e.g. hydro bearing, plastic bearings, silent bearings, suspension joints, shock absorber rubber
  • for bearing replacement on engine mounts, longitudinal and transverse control arms without removing the axle
  • enables the use of Paschke thrust piece sets, wheel hub and bearing extraction sleeve, etc.
  • saves up to 3 hours of time, as the axle parts do not have to be removed
33202303.jpg
Article number: 33202303
  • for changing bearings on engine mounts, front and rear axle e.g. hydromounts, plastic mounts, silent mounts, suspension joints
  • enables the use of Paschke thrust piece sets, bells, etc.
  • trailing links, control arm, etc. no longer have to be removed, thus depending on the application up to 3 hours time saving
32102504.jpg
Article number: 32102504
  • with thread and protective cap
  • with 3/8" connection thread for coupling
  • delivery without coupling and tension/compression bolt
32102638.jpg
Article number: 32102638
  • cylinder side, with 3/8" NPT external thread
  • e.g. for hydraulic cylinder 32102504
  • for connection with hydraulic foot pump
  • also suitable for Celette / Enerpac / Sun
32102639.jpg
Article number: 32102639
  • hose side, with 3/8" NPT internal thread
  • e.g. for hydraulic cylinder 32102504
  • for connection with hydraulic foot pump
  • also suitable for Celette / Enerpac / Sun
32102649.jpg
Article number: 32102649
  • hose side, with 3/8" NPT internal thread
  • e.g. for hydraulic cylinder 32102504
  • for connection with hydraulic foot pump
  • also suitable for Nike
33200401_var.jpg
Article number: 33200401
  • Ball joint lockable for positioning directly on the vehicle
  • for mounting the hydraulic cylinder on a transmission jack with ø 30 mm
  • incl. adapter sleeve for reduction to ø 25 mm
  • two different clamp sizes available:
    item 33200602 - ø 72-82 mm for Paschke, Klann, Enerpac, Hazet, Wallmek.
    item 33200605 - ø 95-100 mm

    Please order matching clamp
33200602.jpg
Article number: 33200602
  • for cylinders from Paschke, Klann, Enerpac, Hazet, Wallmek
  • for use with safety holder art. 32200401
33201607.jpg
Article number: 33201607
  • for silent bearing and support joint tool set
  • required drive: e.g. hydraulic cylinder, mechanical spindle
33201611.jpg
Article number: 33201611
  •  for basic frame 33201607
  • also replacement for basic unit hydraulic, item 33202303
33201603.jpg
Article number: 33201603
  • for use with spindle 33201501
33201501.jpg
Article number: 33201501
  • for use with adaptorr, item 33201603
33201606.jpg
Article number: 33201606
  • e.g. for cylinders from Klann / Longus / Berner
  • for the use of Paschke basic frames with hydraulic cylinders of other manufacturers
33201610.jpg
Article number: 33201610
  • for the use of Paschke basic frames with hydraulic cylinders of other manufacturers
  • for cylinders from e.g. Enerpac (12 t version)
33202603.jpg
Article number: 33202603
  • for use with hydraulic cylinder 32102504
33202607.jpg
Article number: 33202607
  • for higher leverage
  • for use with thrust bolt 33202603
33202401.jpg
Article number: 33202401
  • reinforced version with stepped shaft (M20)
  • for use with hydraulic cylinder 32102504
33202402.jpg
Article number: 33202402
  • reinforced version
  • 17 mm shaft for use with Klann cylinder KL-0040-2500
32111321.jpg
Article number: 32111321
  • for use when changing wheel bearings, wheel hubs, etc.
  • ball bearing
32101611.jpg
Article number: 32101611
  • for tension bolt with thread M20, e.g. 31502604, 32102502
32104615.jpg
Article number: 32104615
  • suitable for spindles with M27
32105401.jpg
Article number: 32105401
33102603.jpg
Article number: 33102603
32102502.jpg
Article number: 32102502
  • for use with hydraulic cylinder 32102504 e.g. for working with wheel bearing tool
1 - 24 (162)